Aluminum, stainless steel, brass, copper, titanium and plastic bar stock for CNC machining
HomeMaterials
Materials · Metals & Engineering Plastics

The Right Material
for Every Part.

Aluminum, stainless steel, steel, brass, copper, titanium and engineering plastics in standard grades — we recommend the grade that fits your strength, weight, corrosion and cost targets.

Material Families

Seven Material Families.One Machine Shop.

Every material below is cut in-house on our 3-, 4- and 5-axis machining centers, CNC lathes and turn-mill machines. Each card lists the common grades, what the material does well and the parts we usually make from it.

  • Aluminum
    13Al

    Aluminum

    Light, quick to machine and easy to anodize — the default choice for housings, brackets, heat sinks and prototypes.

    • 6061
    • 6063
    • 7075
    • 2024
    • 5052
    Key properties
    2.7 g/cm³ · high strength-to-weight · conducts heat
    Typical parts
    Housings, brackets, manifolds, drone and robot parts
    Aluminum CNC Machining
  • Stainless Steel
    Fe·Cr·NiSs

    Stainless Steel

    Corrosion-resistant and easy to keep clean — for fluid, cooling, medical and food-contact parts.

    • 303
    • 304
    • 316
    • 316L
    • 17-4PH
    Key properties
    ≈ 8.0 g/cm³ · excellent corrosion resistance · strong at temperature
    Typical parts
    Liquid-cooling fittings, valves, shafts, medical components
    Stainless Steel CNC Machining
  • Steel
    26Fe

    Steel

    Carbon, alloy and tool steels for strength, toughness and wear — heat-treatable to the hardness on your drawing.

    • 1020
    • 1045
    • 4140 / 42CrMo
    • Tool steel
    Key properties
    7.85 g/cm³ · high strength · heat treatable
    Typical parts
    Shafts, gears, fixtures, tooling plates
    Steel CNC Machining
  • Brass
    Cu·ZnBs

    Brass

    Free-cutting and naturally corrosion-resistant — clean threads and bright surfaces, fast cycle times at volume.

    • C36000 / HPb62
    • C37700 / HPb59
    • C26800 / H68
    • C22000 / H90
    Key properties
    ≈ 8.5 g/cm³ · excellent machinability · low friction
    Typical parts
    Fittings, valves, connectors, electrical contacts
    Brass CNC Machining
  • Copper
    29Cu

    Copper

    The best electrical and thermal conductor we machine — for electrodes, nozzles, bus bars and heat-transfer parts.

    • C11000 / T2
    • C10200 (OF)
    • C14500 (Te-Cu)
    Key properties
    8.9 g/cm³ · highest conductivity · soft and ductile
    Typical parts
    Electrodes, nozzles, bus bars, heat sinks
    Copper CNC Machining
  • Titanium
    22Ti

    Titanium

    Steel-like strength at just over half the weight, with outstanding corrosion resistance and biocompatibility.

    • Grade 2
    • Grade 5 / TC4
    • Ti-6Al-4V
    Key properties
    4.4 g/cm³ · best strength-to-weight · biocompatible
    Typical parts
    Aerospace fittings, medical parts, hydraulic connectors
    Titanium CNC Machining
  • Engineering Plastics
    C·H·OPk

    Engineering Plastics

    Light, insulating and self-lubricating — machined from rod and plate when a part must not conduct, corrode or wear a mating surface.

    • PEEK
    • POM / Delrin
    • PA / Nylon
    • ABS
    • PTFE
    • PC
    Key properties
    1.0–2.2 g/cm³ · electrical insulation · chemical resistance
    Typical parts
    Insulators, bushings, gears, wear pads, fixtures
    Engineering Plastics CNC Machining
  • Not on the List?

    Bronze, special steels and other alloys are sourced to your drawing. Tell us the grade or the property you need — we confirm availability with the quote.

    Ask an Engineer
Material Comparison

Strength, Weight, Cost.Side by Side.

A quick way to shortlist: relative ratings for the common machining grades of each family. Sort by the property that matters most — our engineers confirm the final grade with your quote.

Sort by
  • Default
  • Strength
  • Lightest
  • Machinability
  • Corrosion resistance
  • Lowest cost
Material Strength Density Machinability Corrosion Cost Common finishes Typical uses
AlAluminum6061 · 7075 · 6063 2.7g/cm³ Anodizing, brushing, polishing Housings, brackets, heat sinks, prototypes
SsStainless Steel304 · 316L · 17-4PH 8.0g/cm³ Polishing, brushing, heat treatment Fluid and cooling fittings, medical, food equipment
FeSteel1045 · 4140 · tool steel 7.85g/cm³ Heat treatment, plating Shafts, gears, fixtures, tooling
BsBrassC36000 · C26800 8.5g/cm³ Polishing, plating Fittings, valves, connectors, contacts
CuCopperC11000 · C10200 8.9g/cm³ Plating, polishing Electrodes, bus bars, heat-transfer parts
TiTitaniumGrade 2 · Grade 5 (TC4) 4.4g/cm³ Polishing, brushing Aerospace, medical, high-load lightweight parts
PkEngineering PlasticsPEEK · POM · PA · PTFE 1.0–2.2g/cm³ As machined Insulators, bushings, wear parts, fixtures

= 3 of 5. Ratings are relative within this table, 5 = best (cost: 5 = most expensive). Densities are typical values; plastics range from PA/POM (≈1.1–1.4) to PTFE (≈2.2). All figures are general guidance, not guaranteed material properties.

Selection Guide

Choose by Requirement.Not by Habit.

Start from what the part has to do — carry load, survive coolant, conduct heat, slide quietly — and the shortlist gets short. These are the grades we recommend most often.

Not Sure? Send the Drawing.

Tell us the load, environment and finish. An engineer recommends the grade with your quote — within 24 hours, NDA on request.

  • If you need

    Light & Strong

    7075 for highly loaded parts, 6061 as the all-round choice, titanium when weight and strength both matter most.

  • If you need

    Corrosion Resistance

    316L stands up to chlorides, coolant and cleaning chemicals; 304 is enough for most indoor and fresh-water parts.

  • If you need

    Electrical & Thermal Conductivity

    Copper conducts best. Aluminum gives roughly 40% of copper's conductivity at under a third of the weight — ideal for heat sinks.

  • If you need

    Wear Resistance & Low Friction

    Self-lubricating plastics for bushings, slides and gears; leaded brass where a sliding part has to be metal.

  • If you need

    High Strength & Hardness

    Heat-treatable alloy and tool steels for shafts, gears and tooling; 17-4PH when the part also has to resist corrosion.

  • If you need

    Fast Machining, Low Unit Cost

    Free-machining grades cut fastest and wear tools least — the cheapest route for high-volume turned parts.

  • If you need

    High Service Temperature

    PEEK keeps its properties to around 250 °C — the top choice among plastics. Hotter than that, go to stainless steel or titanium.

  • If you need

    A Cosmetic or Colored Finish

    Anodized aluminum in clear, black or color; polished stainless or brass when the part has to shine.

Get a Quote

Send a drawing.Get a price in 24 hours.

  1. 01

    Upload 2D/3D files

  2. 02

    Quote & DFM feedback in 24 h

  3. 03

    Prototype or first article

  4. 04

    Production, inspection, delivery

    Your files stay confidential and are only used to quote.

    Thank you!

    Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.