Anodized aluminum CNC machined parts and aluminum bar stock

Aluminum
CNC Machining.

Custom aluminum machined parts — housings, brackets, manifolds and turned components — cut on 3-, 4- and 5-axis centers and finished with anodizing in the color you specify.

  • 5Core aluminum grades
  • ±0.01mmTightest tolerance
  • 24hQuote turnaround
  • 1 → 10k+Pieces per order
Why Aluminum

Light, Fast, Finishable.The Metal We Cut Most.

Aluminum CNC machining for housings, brackets, heat sinks and drone or robot parts. As an aluminum CNC machining manufacturer with 104 CNC machines, we turn and mill custom aluminum parts from prototype batches of 1–100 pcs to production runs of 10,000+ pcs, anodized in the color you specify.

Aluminum machined parts in rose, gold, red, black and natural finishes
  • 2.7g/cm³About ⅓ the density of steel
  • ±0.01mmTightest tolerance
  • 3·4·5Axis machining
  • Light and Strong

    About a third of the weight of steel; 7075-T6 reaches strengths close to many steels.

  • Fast to Machine

    High cutting speeds and short cycle times keep the unit price low, from prototype to volume.

  • Anodized in Any Color

    Clear, black, red, gold or rose — a hard, corrosion-resistant oxide layer that will not peel.

  • Conducts Heat

    Good thermal and electrical conductivity for heat sinks, cold plates and electronics housings.

  • Naturally Corrosion-Resistant

    Forms its own protective oxide; 5052 and 6061 hold up well outdoors and near water.

  • Tight Tolerances, Thin Walls

    Planned fixturing and 5-axis setups hold ±0.01 mm on critical features without distorting thin walls.

  • 01

    CNC Turning

    Fittings, housings, cups and shafts turned from 6061 and 7075 bar.

  • 02

    CNC Milling

    Housings, brackets, plates and blocks on 3-, 4- and 5-axis machining centers.

  • 03

    Turn-Mill

    Drone wheels, connectors and complex round parts finished complete in one setup.

Aluminum Grades

Five Alloys.Each With a Job.

The aluminum grades we machine most, from all-round 6061 to high-strength 7075. Pick one to see its typical properties — the grade selector below helps you choose.

  • 6061All-round
  • 6063Best finish
  • 7075High strength
  • 2024Fatigue-resistant
  • 5052Marine grade
  • 6061-T6

    UNS A96061 · EN AW-6061 · AlMg1SiCu

    The all-round structural alloy: good strength, very good machinability, anodizes well and welds. The default grade for most custom aluminum parts.

    Best for

    • Housings, brackets and plates
    • Fixtures, jigs and machine parts
    • Prototypes and general machined parts
    • 310MPaTensile strength
    • 276MPaYield strength
    • 95HBHardness
    • 2.70g/cm³Density
    • Machinability
    • Corrosion resistance
    • Anodizing
    Quote a 6061 Part
  • 6063-T5

    UNS A96063 · EN AW-6063 · AlMg0.7Si

    Lower strength than 6061 but the smoothest surface and the most even anodized color, plus high thermal conductivity — the alloy for heat sinks and cosmetic parts.

    Best for

    • Heat sinks and cold plates
    • Cosmetic anodized covers and bezels
    • Frames and profile-based parts
    • 186MPaTensile strength
    • 145MPaYield strength
    • 60HBHardness
    • 2.69g/cm³Density
    • Machinability
    • Corrosion resistance
    • Anodizing
    Quote a 6063 Part
  • 7075-T6

    UNS A97075 · EN AW-7075 · AlZn5.5MgCu

    Zinc-alloyed high-strength grade — close to many steels at about a third of the weight. Machines very well; not suited to welding and needs anodizing outdoors.

    Best for

    • Aerospace and drone structures
    • Robot arms and high-load brackets
    • Molds, jigs and wear plates
    • 572MPaTensile strength
    • 503MPaYield strength
    • 150HBHardness
    • 2.81g/cm³Density
    • Machinability
    • Corrosion resistance
    • Anodizing
    Quote a 7075 Part
  • 2024-T3

    UNS A92024 · EN AW-2024 · AlCu4Mg1

    Copper-alloyed aerospace grade with excellent fatigue strength. Machines well, but its corrosion resistance is low — plan for anodizing or a protective coating.

    Best for

    • Aerospace fittings and structures
    • Fatigue-loaded levers and links
    • Gears, shafts and pins
    • 483MPaTensile strength
    • 345MPaYield strength
    • 120HBHardness
    • 2.78g/cm³Density
    • Machinability
    • Corrosion resistance
    • Anodizing
    Quote a 2024 Part
  • 5052-H32

    UNS A95052 · EN AW-5052 · AlMg2.5

    Magnesium-alloyed, non-heat-treatable grade with outstanding resistance to salt water and excellent weldability. Softer and gummier to machine than 6061.

    Best for

    • Marine and outdoor parts
    • Covers, panels and enclosures
    • Welded assemblies and tanks
    • 228MPaTensile strength
    • 193MPaYield strength
    • 60HBHardness
    • 2.68g/cm³Density
    • Machinability
    • Corrosion resistance
    • Anodizing
    Quote a 5052 Part

Aluminum alloy comparison

Typical values · reference only
GradeUNS / ENTensile (MPa)Yield (MPa)ElongationHardnessDensity (g/cm³)MachinabilityCorrosionAnodizingWeldabilityBest for
6061-T6A96061 / AW-606131027612%95 HB2.70GoodHousings, brackets, fixtures
6063-T5A96063 / AW-606318614512%60 HB2.69GoodHeat sinks, cosmetic parts
7075-T6A97075 / AW-707557250311%150 HB2.81PoorAerospace, robotics, high load
2024-T3A92024 / AW-202448334518%120 HB2.78PoorAerospace, fatigue-loaded parts
5052-H32A95052 / AW-505222819312%60 HB2.68ExcellentMarine, enclosures, welded parts

Typical values for the temper shown (6061-T6, 6063-T5, 7075-T6, 2024-T3, 5052-H32). Reference data from common material standards — not guaranteed minimums. Actual properties depend on supplier, size and temper; material grade is verified at incoming inspection.

Grade Selector

Tell Us What Matters.We Name the Grade.

Pick one or more requirements and the matrix ranks the five aluminum grades in real time. A starting point for your drawing — our engineers confirm the final grade with your quote.

What does your part need?

Select one or more
  • High strength
  • Fast machining
  • Corrosion resistance
  • Cosmetic anodizing
  • Weldability
  • Thermal conductivity
  • Low material cost
Recommended grade
6061-T6 All-round pick

The balanced choice: good strength, machines fast, anodizes evenly and welds. If you are unsure, start here.

Runner-up 6063-T5
Quote This Grade
GradeHigh strengthFast machiningCorrosion resistanceCosmetic anodizingWeldabilityThermal conductivityLow material costMatch
6061-T6All-round

The balanced choice: good strength, machines fast, anodizes evenly and welds. If you are unsure, start here.

–
6063-T5Best finish

The best surface and the most even anodized color, plus the highest thermal conductivity of the five — ideal for heat sinks and cosmetic parts that are not highly loaded.

–
7075-T6High strength

The strongest of the five — close to many steels at about a third of the weight. Choose it for highly loaded lightweight parts and avoid welding.

–
2024-T3Fatigue-resistant

Excellent fatigue strength for cyclically loaded parts and machines well. Plan for anodizing or a coating — its bare corrosion resistance is low.

–
5052-H32Marine grade

The best in salt water and the easiest to weld. Lower strength and gummier to machine — use it for marine parts, covers and welded assemblies.

–

Relative ratings within these five grades (5 = best). General guidance only — load, environment, finish and price on your drawing decide the final choice.

Part Cases

Aluminum Machined Parts,Made in Our Plant.

CNC aluminum parts we have turned, milled and turn-mill machined — natural, black and color-anodized. Click a part to enlarge it.

  • All Parts
Surface Finishes

Anodized in Your Color.Or Left Bare.

Anodizing turns the aluminum surface into a hard, corrosion-resistant oxide that will not peel. Pick a color to see a real part — every finished part is checked again before packing.

Anodizing Colors

Clear and black suit most technical parts; colors are matched to your reference. 6061 and 6063 give the most even shade.

  • RedBright color on fittings and visible parts
  • BlackLow-glare and scratch-hiding for technical parts
  • Clear / NaturalKeeps the metal look, adds corrosion protection
  • GoldWarm metallic tone for consumer products
  • RoseSoft color for cosmetic and handheld parts
  • Red anodized aluminum CNC turned fitting
    Red anodized · CNC turned fitting
  • Black anodized aluminum CNC milled clamp arm
    Black anodized · CNC milled clamp arm
  • Clear anodized natural aluminum milled ring bracket
    Natural aluminum · milled ring bracket
  • Gold anodized aluminum CNC turned grinder cup
    Gold anodized · turned grinder cup
  • Rose anodized aluminum CNC turned grinder housing
    Rose anodized · turned grinder housing
  • As-machined aluminum turn-mill drone wheel

    As Machined

    Clean, deburred machined aluminum — the fastest and most economical option.

    Best for: fixtures, internal parts, prototypes
  • Brushed satin finish on an aluminum CNC machined part

    Brushing

    An even satin grain on visible faces, often combined with clear or black anodizing.

    Best for: covers, panels, front plates
  • Polished CNC machined metal part

    Polishing

    Bright, smooth cosmetic surfaces — before anodizing for a glossy colored look.

    Best for: consumer and display parts
  • Plated CNC machined metal parts

    Plating

    Metal coatings where a part needs a harder, conductive or solderable surface.

    Best for: electrical and wear surfaces

Need hard anodizing, masking of selected faces or another coating? Note it in your RFQ — we confirm feasibility with the quote.

FAQ

Aluminum QuestionsBuyers Ask First.

Can’t find your answer? Send us your drawing and questions — an engineer replies within 24 hours.

Ask an Engineer
  • 6061-T6 is the all-round choice. Pick 7075 for maximum strength, 6063 for heat sinks and the most even anodized color, 2024 for fatigue-loaded parts and 5052 for marine or welded parts. The grade selector above gives a quick ranking — or ask us.

  • Clear (natural), black, red, gold and rose are shown on this page; other colors are matched to your reference sample. 6061 and 6063 give the most even shade — tell us the color with your quote.

  • Up to ±0.01 mm on critical features, checked on our vision measuring system before parts ship. Inspection reports are available on request.

  • Usually, yes. Aluminum cuts much faster than stainless steel or titanium, so cycle times and tool wear drop — for most housings and brackets it is the most cost-effective metal.

  • Yes. We machine prototype batches of 1–100 pcs as well as production runs of 10,000+ pcs, with the same process and inspection — no minimum order quantity.

  • Yes, on our 3-, 4- and 5-axis machining centers. We plan fixturing and tool paths to avoid distortion on thin walls and deep pockets, and flag risky features in our DFM feedback before quoting.

Get a Quote

Send a drawing.Get a price in 24 hours.

  1. 01

    Upload 2D/3D files

  2. 02

    Quote & DFM feedback in 24 h

  3. 03

    Prototype or first article

  4. 04

    Production, inspection, delivery

    Your files stay confidential and are only used to quote.

    Thank you!

    Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.