Brass
CNC Machining.
Corrosion-resistant brass components for fluid control, electrical systems, automotive and industrial applications — precision turned, milled and turn-mill machined to tolerances as tight as ±0.01 mm.
Stainless steel CNC machining for parts that live with water, coolant, chemicals and cleaning cycles. As a stainless steel machining company we turn, mill and turn-mill custom stainless steel parts — from a single prototype to 10,000+ pcs — and hold critical features to ±0.01 mm.

A chromium-rich passive layer resists water, coolant and most chemicals; 316/316L adds molybdenum for chlorides.
Keeps its strength from sub-zero to high service temperatures; 17-4PH exceeds 1,300 MPa after aging.
Smooth, non-porous surfaces for medical, food and fluid-handling parts that are washed or sterilized.
Threads, O-ring grooves and sealing faces cut clean and burr-free — liquid-cooling fittings ship ready to assemble.
Sharp carbide tools, rigid fixturing and steady feeds keep austenitic grades from hardening under the cutter.
From as-machined to brushed or mirror-polished faces, specified with your quote and checked before packing.
We machine the 300-series workhorses and the precipitation-hardening 17-4PH. Pick a grade to see where it fits — or send your drawing and we recommend one with the quote.
Placeholder summary for Brass type 1.
Placeholder summary for Brass type 2.
Placeholder summary for Brass type 3.
| Grade | UNS / EN | Tensile (MPa) | Yield (MPa) | Elongation | Hardness | Machinability | Corrosion | Weldability | Best for |
|---|---|---|---|---|---|---|---|---|---|
| Type 1 | Placeholder | 100 | 70 | 11% | 25 HB | Fair | General Brass parts | ||
| Type 2 | Placeholder | 120 | 80 | 12% | 30 HB | Fair | General Brass parts | ||
| Type 3 | Placeholder | 140 | 90 | 13% | 35 HB | Fair | General Brass parts |
Typical values for annealed bar; 17-4PH in condition H900 (aged). Reference data from common material standards — not guaranteed minimums. Actual properties depend on supplier, size and temper; material grade is verified at incoming inspection.
Precision brass parts machined in our plant — including fittings, connectors, bushings, shafts and manifolds. Click a part to enlarge it.

Machinability Index 100:Highest machinability rating of any structural metal; enables maximum spindle speeds with minimal tool wear and excellent chip control.Superior Surface Finish:Short, broken chips produce burr-free cut surfaces with Ra as low as 0.4 um in finish-turning operations without post-machining polishing.Tight Tolerance Capability:Dimensional tolerances to ±0.005 mm on CNC turned diameters; bore roundness to 0.003 mm TIR.Excellent Thread Quality:Low shear strength produces clean, accurate threads in BSP, NPT, UNC, UNF, and metric forms without tearing or built-up edge.Good Corrosion Resistance:Suitable for fresh water, petroleum, industrial gas, and general atmospheric service (not recommended for ammonia, sea water, or acid service).Electrical Conductivity:26% IACS; suitable for electrical terminal bodies, connector housings, and bus components.Soft Solderability:Excellent solderability with resin flux; compatible with soft solder (Sn-Ag, Sn-Pb) and brazing alloys.

Material: Brass (C3604 / C2600).Machining Process: CNC Turning, Milling, Drilling, Tapping.Key Features: Multi-hole configuration, internal threading, precision positioning.Typical Applications: Automation, Industrial Equipment, Fluid Systems, Robotics.Tolerance: 0.01 mm

Our brass pins offer exceptional electrical conductivity, corrosion resistance, and mechanical strength, making them ideal for applications requiring reliable electrical connections and mechanical fastening solutions. The manufacturing process involves precision cold forging of brass bars, followed by automatic machining and threading operations when required. This combination ensures dimensional accuracy, superior surface finish, and consistent mechanical properties across all produced components. Our brass electrical pins are designed to meet stringent industry requirements for electrical conductivity, contact resistance, and environmental durability. "

Process Type: Progressive Die Stamping.Die Materials: Tool Steel / Carbide / Hardened Steel.Workpiece Materials: Stainless Steel / Aluminum / Brass / Carbon Steel.Tolerance Capability: ±0.01–0.05 mm (depending on part structure).Production Speed: Up to 250–1500 strokes/min.Tool Life Design: High-volume continuous production.Part Complexity: Flat parts to complex formed geometries.Surface Requirement: Plating / Coating / Natural finish.Production Mode: Prototype → Bridge tooling → Mass production

Processing Equipment: Swiss-type CNC Lathe, Turn-Mill Machining Center, Gold-Plating Production Line.Dimensional Tolerance: ±0.005mm.Coaxiality Accuracy: ≤0.003mm.Gold Plating Thickness: 0.1~1.0μm (Customizable on request).Surface Roughness: Ra 0.2 ~ Ra 0.4 (After gold plating).Material: C3604 Brass (Phosphor Bronze / Beryllium Copper optional).Production Capabilities: Prototyping, Low-volume Customization, Mass-volume Production.Structure Form: Stepped shaft pin, slotted elastic contact structure.Application Form: Connector pins, terminals, signal transmission connectors
Send a STEP, IGES or PDF drawing — we quote stainless parts within 24 hours, with DFM feedback.
Specify the finish with your quote — on the whole part or on selected faces. Every finished part is checked again before it is packed.
Choose the roughness your function needs: sealing faces and visible surfaces get finer, hidden faces stay as machined to keep the price down.




Clean, deburred machined surface — the most economical option for functional parts.
Best for: internal and hidden parts
An even, directional satin grain that hides handling marks on visible faces.
Best for: covers, panels, housings
Bright, smooth surfaces up to a mirror finish of Ra 0.4 — easier to clean, better sealing.
Best for: fluid, medical, cosmetic parts
Aging or hardening of heat-treatable grades such as 17-4PH to the hardness on your drawing.
Best for: high-load, wear-resistant partsNeed another finish, such as passivation or a specific coating? Note it in your RFQ — we confirm feasibility with the quote.
Can’t find your answer? Send us your drawing and questions — an engineer replies within 24 hours.
Most often 303, 304, 316, 316L and 17-4PH. Other grades can be sourced to your drawing — tell us the specification when you ask for a quote.
304 suits most indoor and fresh-water parts. Choose 316 or 316L for chlorides, coolants, cleaning chemicals or marine exposure, and 316L when the part will be welded. If you are unsure, describe the environment and we recommend a grade with the quote.
Up to ±0.01 mm on critical features, checked on our vision measuring system. Mark the critical dimensions on your drawing and we hold those tightest; inspection reports are available on request.
Yes. We mill and turn stainless fittings, blocks and connectors for data-center liquid-cooling loops, with threads, sealing faces and O-ring grooves machined clean and burr-free, ready to assemble.
As machined, brushing, polishing up to a mirror finish of Ra 0.4, and heat treatment for hardenable grades such as 17-4PH. Specify the finish on your drawing or in your RFQ.
Yes — prototype batches of 1–100 pcs and production runs of 10,000+ pcs, quoted within 24 hours from your SolidWorks, AutoCAD, STEP, IGES or PDF drawing. We sign an NDA before you share files if you ask.
Upload 2D/3D files
Quote & DFM feedback in 24 h
Prototype or first article
Production, inspection, delivery
Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.
English