Stainless steel CNC machined fittings, brackets and turned parts
HomeMaterialsStainless Steel
304 · 316 · 316L · 303 · 17-4PH

Stainless Steel
CNC Machining.

Corrosion-resistant stainless steel parts for liquid cooling, fluid control, medical and industrial equipment — turned, milled and turn-mill machined to ±0.01 mm.

  • 5Common stainless grades
  • ±0.01mmTightest tolerance
  • 24hQuote turnaround
  • 1 → 10k+Pieces per order
Why Stainless Steel

Built to Resist.Machined to Hold Size.

Stainless steel CNC machining for parts that live with water, coolant, chemicals and cleaning cycles. As a stainless steel machining company we turn, mill and turn-mill custom stainless steel parts — from a single prototype to 10,000+ pcs — and hold critical features to ±0.01 mm.

Stainless steel machined parts: milled liquid-cooling block, turned shafts and grooved fittings
  • ≈ 8.0g/cm³Density, 300 series
  • ±0.01mmTightest tolerance
  • Ra 0.4Mirror-polished finish
  • Corrosion Resistance

    A chromium-rich passive layer resists water, coolant and most chemicals; 316/316L adds molybdenum for chlorides.

  • Strength at Temperature

    Keeps its strength from sub-zero to high service temperatures; 17-4PH exceeds 1,300 MPa after aging.

  • Hygienic & Easy to Clean

    Smooth, non-porous surfaces for medical, food and fluid-handling parts that are washed or sterilized.

  • Leak-Tight Sealing Faces

    Threads, O-ring grooves and sealing faces cut clean and burr-free — liquid-cooling fittings ship ready to assemble.

  • Work Hardening Under Control

    Sharp carbide tools, rigid fixturing and steady feeds keep austenitic grades from hardening under the cutter.

  • Polished up to Ra 0.4

    From as-machined to brushed or mirror-polished faces, specified with your quote and checked before packing.

  • 01

    CNC Turning

    Shafts, screws, sleeves and threaded fittings from 303, 304 and 316 bar.

  • 02

    CNC Milling

    Blocks, housings, brackets and liquid-cooling manifolds on 3-, 4- and 5-axis centers.

  • 03

    Turn-Mill

    Connectors and hydraulic parts finished complete in one setup — no re-clamping errors.

Stainless Grades

Five Grades.Compared Side by Side.

We machine the 300-series workhorses and the precipitation-hardening 17-4PH. Pick a grade to see where it fits — or send your drawing and we recommend one with the quote.

  • 303Free-machining
  • 304All-round
  • 316Chloride-resistant
  • 316LLow carbon
  • 17-4PHHigh strength
  • AISI 303

    UNS S30300 · EN 1.4305 · SUS303

    Austenitic stainless with added sulfur: the fastest-cutting stainless grade, with clean chips and long tool life. The trade-off is lower corrosion resistance and poor weldability.

    Best for

    • Shafts, screws and threaded fasteners
    • Bushings, spacers and fittings
    • High-volume turned parts that are not welded
    • 620MPaTensile strength
    • 240MPaYield strength
    • 160HBHardness
    • 8.0g/cm³Density
    • Machinability
    • Corrosion resistance
    Quote a 303 Part
  • AISI 304

    UNS S30400 · EN 1.4301 · SUS304

    The classic 18/8 stainless: good corrosion resistance, weldable and easy to keep clean. The default choice for indoor, fresh-water and food-contact parts.

    Best for

    • Brackets, housings and covers
    • Food, medical and lab equipment parts
    • General fittings and connectors
    • 515MPaTensile strength
    • 205MPaYield strength
    • ≤ 201HBHardness
    • 7.9g/cm³Density
    • Machinability
    • Corrosion resistance
    Quote a 304 Part
  • AISI 316

    UNS S31600 · EN 1.4401 · SUS316

    Molybdenum-bearing austenitic grade with clearly better resistance to chlorides, acids and pitting — the step up from 304 for marine, chemical and coolant service.

    Best for

    • Marine and outdoor hardware
    • Pump, valve and fluid-handling parts
    • Parts exposed to coolant or cleaning chemicals
    • 515MPaTensile strength
    • 205MPaYield strength
    • ≤ 217HBHardness
    • 8.0g/cm³Density
    • Machinability
    • Corrosion resistance
    Quote a 316 Part
  • AISI 316L

    UNS S31603 · EN 1.4404 · SUS316L

    Low-carbon 316: the same corrosion resistance without sensitization after welding. A common choice for liquid-cooling fittings, hydraulic connectors and medical components.

    Best for

    • AI server liquid-cooling fittings
    • Hydraulic and nozzle connectors
    • Welded assemblies and medical parts
    • 485MPaTensile strength
    • 170MPaYield strength
    • ≤ 217HBHardness
    • 8.0g/cm³Density
    • Machinability
    • Corrosion resistance
    Quote a 316L Part
  • 17-4PH (630)

    UNS S17400 · EN 1.4542 · SUS630

    Precipitation-hardening martensitic stainless: machined in the solution-annealed state, then aged to very high strength and hardness while keeping good corrosion resistance.

    Best for

    • High-load shafts and valve parts
    • Aerospace and tooling components
    • Wear parts that must also resist corrosion
    • 1,310MPaTensile strength (H900)
    • 1,170MPaYield strength (H900)
    • ≈ 40HRCHardness (H900)
    • 7.8g/cm³Density
    • Machinability
    • Corrosion resistance
    Quote a 17-4PH Part

Stainless steel grade comparison

Typical values · reference only
GradeUNS / ENTensile (MPa)Yield (MPa)ElongationHardnessMachinabilityCorrosionWeldabilityMagneticBest for
303S30300 / 1.430562024050%160 HBPoorNoTurned parts, fasteners
304S30400 / 1.430151520540%≤ 201 HBGoodNoGeneral parts, food & medical
316S31600 / 1.440151520540%≤ 217 HBGoodNoMarine, chemical, fluid parts
316LS31603 / 1.440448517040%≤ 217 HBExcellentNoLiquid cooling, hydraulics, medical
17-4PHS17400 / 1.45421,3101,17010%≈ 40 HRCGoodYesHigh-strength shafts, valves

Typical values for annealed bar; 17-4PH in condition H900 (aged). Reference data from common material standards — not guaranteed minimums. Actual properties depend on supplier, size and temper; material grade is verified at incoming inspection.

Part Cases

Stainless Steel Parts,Straight off Our Machines.

Stainless steel machined parts made in our plant — liquid-cooling fittings, connectors, shafts and housings. Click a part to enlarge it.

  • All Parts
Surface Finishes

Finishes for Stainless Steel Parts.From Machined to Mirror.

Specify the finish with your quote — on the whole part or on selected faces. Every finished part is checked again before it is packed.

Surface Roughness We Reach

Choose the roughness your function needs: sealing faces and visible surfaces get finer, hidden faces stay as machined to keep the price down.

  • 3.2
    Ra 3.2 µm · As milledStandard machined surface, visible tool marks
  • 1.6
    Ra 1.6 µm · Fine turnedFine finishing pass for fits and threads
  • 0.8
    Ra 0.8 µm · PolishedSmooth sealing and bearing surfaces
  • 0.4
    Ra 0.4 µm · MirrorMirror turning and polishing, e.g. mold inserts
  • Stainless steel CNC milled part with as-machined surface
    Ra 3.2 · milled stainless block
  • Stainless steel turned screw with fine turned surface
    Ra 1.6 · fine-turned screw
  • Polished stainless steel turned shaft
    Ra 0.8 · polished turned shaft
  • S136 mirror-polished stainless steel mold insert with spiral inner cavity
    Ra 0.4 · S136 mirror-polished mold insert
  • As-machined stainless steel milled part

    As Machined

    Clean, deburred machined surface — the most economical option for functional parts.

    Best for: internal and hidden parts
  • Brushed satin finish on a CNC machined part

    Brushing

    An even, directional satin grain that hides handling marks on visible faces.

    Best for: covers, panels, housings
  • Polished stainless steel CNC turned part

    Polishing

    Bright, smooth surfaces up to a mirror finish of Ra 0.4 — easier to clean, better sealing.

    Best for: fluid, medical, cosmetic parts
  • Stainless steel turned parts on a heat-treatment tray

    Heat Treatment

    Aging or hardening of heat-treatable grades such as 17-4PH to the hardness on your drawing.

    Best for: high-load, wear-resistant parts

Need another finish, such as passivation or a specific coating? Note it in your RFQ — we confirm feasibility with the quote.

FAQ

Stainless QuestionsBuyers Ask First.

Can’t find your answer? Send us your drawing and questions — an engineer replies within 24 hours.

Ask an Engineer
  • Most often 303, 304, 316, 316L and 17-4PH. Other grades can be sourced to your drawing — tell us the specification when you ask for a quote.

  • 304 suits most indoor and fresh-water parts. Choose 316 or 316L for chlorides, coolants, cleaning chemicals or marine exposure, and 316L when the part will be welded. If you are unsure, describe the environment and we recommend a grade with the quote.

  • Up to ±0.01 mm on critical features, checked on our vision measuring system. Mark the critical dimensions on your drawing and we hold those tightest; inspection reports are available on request.

  • Yes. We mill and turn stainless fittings, blocks and connectors for data-center liquid-cooling loops, with threads, sealing faces and O-ring grooves machined clean and burr-free, ready to assemble.

  • As machined, brushing, polishing up to a mirror finish of Ra 0.4, and heat treatment for hardenable grades such as 17-4PH. Specify the finish on your drawing or in your RFQ.

  • Yes — prototype batches of 1–100 pcs and production runs of 10,000+ pcs, quoted within 24 hours from your SolidWorks, AutoCAD, STEP, IGES or PDF drawing. We sign an NDA before you share files if you ask.

Get a Quote

Send a drawing.Get a price in 24 hours.

  1. 01

    Upload 2D/3D files

  2. 02

    Quote & DFM feedback in 24 h

  3. 03

    Prototype or first article

  4. 04

    Production, inspection, delivery

    Your files stay confidential and are only used to quote.

    Thank you!

    Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.