Titanium
CNC Machining.
Lightweight, high-strength titanium parts for aerospace, chemical processing and precision industrial equipment—CNC turned, milled and prototyped to your drawing.
From commercially pure TA1–TA3 to corrosion-resistant TA9–TA11 and high-strength Grade 9 and Grade 13 alloys, we machine custom titanium brackets, shafts, flanges and chemical-equipment components—from rapid prototypes to production quantities.

A chromium-rich passive layer resists water, coolant and most chemicals; 316/316L adds molybdenum for chlorides.
Keeps its strength from sub-zero to high service temperatures; 17-4PH exceeds 1,300 MPa after aging.
Smooth, non-porous surfaces for medical, food and fluid-handling parts that are washed or sterilized.
Threads, O-ring grooves and sealing faces cut clean and burr-free — liquid-cooling fittings ship ready to assemble.
Sharp carbide tools, rigid fixturing and steady feeds keep austenitic grades from hardening under the cutter.
From as-machined to brushed or mirror-polished faces, specified with your quote and checked before packing.
We machine the 300-series workhorses and the precipitation-hardening 17-4PH. Pick a grade to see where it fits — or send your drawing and we recommend one with the quote.
Placeholder summary for Titanium type 1.
Placeholder summary for Titanium type 2.
Placeholder summary for Titanium type 3.
| Grade | UNS / EN | Tensile (MPa) | Yield (MPa) | Elongation | Hardness | Machinability | Corrosion | Weldability | Best for |
|---|---|---|---|---|---|---|---|---|---|
| Type 1 | Placeholder | 100 | 70 | 11% | 25 HB | Fair | General Titanium parts | ||
| Type 2 | Placeholder | 120 | 80 | 12% | 30 HB | Fair | General Titanium parts | ||
| Type 3 | Placeholder | 140 | 90 | 13% | 35 HB | Fair | General Titanium parts |
Typical values for annealed bar; 17-4PH in condition H900 (aged). Reference data from common material standards — not guaranteed minimums. Actual properties depend on supplier, size and temper; material grade is verified at incoming inspection.
Explore Grade 9 and Grade 13 precision parts alongside TA1, TA2, TA3, TA9, TA10 and TA11 components for structural, chemical-processing and corrosion-resistant applications. Click a part to enlarge it.

Services : Custom CNC Titanium Alloy Grade 13 Ti-13V-11Cr-3Al UNS R58010 Machining Parts;Supply Ability : 100000 Pieces per Month;Material:Titanium Alloy;Surface roughness : Ra 0.1~3.2;Surface treatment : Customer's Demand、Anodized 、Plating、Brushed etc;Tolerance : +/-0.001mm ~ +/-0.05mm;Drawing format : CAD file (dwg, dxf, pdf, etc.), 3D File (step, stp, etc), drawing design;Standard or not : Non standard,customized as drawing or sample

Services : Custom CNC Titanium Alloy Grade 9 Ti-3Al-2.5V UNS R56320 Machining Parts;Supply Ability : 100000 Pieces per Month;Material:Titanium Alloy;Surface roughness : Ra 0.1~3.2;Surface treatment : Customer's Demand、Anodized 、Plating、Brushed etc;Tolerance : +/-0.001mm ~ +/-0.05mm;Drawing format : CAD file (dwg, dxf, pdf, etc.), 3D File (step, stp, etc), drawing design;Standard or not : Non standard,customized as drawing or sample;

Services : VMT OEM 0.01mm Rapid Prototyping Titanium Machined Parts Factory;Supply Ability : 100000 Pieces per Month;material:Titanium ( TA1,TA2/GR2, TA4/GR5, TC4, TC18 etc );Surface roughness : Ra 0.1~3.2;Surface treatment : Customer's Demand、Anodized 、Plating、PVD 、Nickel Plating、Sandblasting、Powder Cating、Polishing、Multi-color anodized、Painting etc;Tolerance : +/-0.001mm ~ +/-0.05mm;Drawing format : CAD file (dwg, dxf, pdf, etc.), 3D File (step, stp, etc), drawing design;Standard or not : Non standard,customized as drawing or sample

Lowest impurity content,ighest plasticity and cold working performance, but lower strength. Explosion-proof composite plate cladding and structural transition layers withigh forming requirements.

Nickel and molybdenum are added to increase strength and resistance to erosion corrosion. Heat exchange tubes and tube sheet cladding for applications in high chloride salts media in evaporative crystallizer.

It is high temperature corrosion resistant titanium-palladium alloy. It is very stable in high temperature acidic or chloride environment and is established in high temperature heat exchanger as well as in critical components which run continuously for long hours.

Industrial pure titanium most widely used in general, with a good-compatibility of strength,plasticity and corrosion resistance to chloride ion. It is extensively used in the body of chemical equipment including container shells, nozzles, and flanges.

The difference between the two lies in the fact that the TA3 spec has higher strength than that of the TA2, but its plasticity and corrosion resistance are slightly lowered. For high load components like reactor agitator shaft.

Certain improvements have been made on TA2, palladium addition substantially enhanced resistance to reducing media and crevice corrosion. Frequently used for flange sealing rings and for dead zone corrosion applications.
Send a STEP, IGES or PDF drawing — we quote stainless parts within 24 hours, with DFM feedback.
Specify the required finish with your RFQ—on the complete part or selected surfaces. Options include as-machined, anodized, brushed, sandblasted, plated, PVD-coated and polished finishes, subject to the alloy and application.
Select the roughness your component requires: use finer finishes for sealing, sliding or visible surfaces, while non-critical areas can remain as machined to balance performance and cost.




Clean, deburred machined surface — the most economical option for functional parts.
Best for: internal and hidden parts
An even, directional satin grain that hides handling marks on visible faces.
Best for: covers, panels, housings
Bright, smooth surfaces up to a mirror finish of Ra 0.4 — easier to clean, better sealing.
Best for: fluid, medical, cosmetic parts
Aging or hardening of heat-treatable grades such as 17-4PH to the hardness on your drawing.
Best for: high-load, wear-resistant partsNeed another finish, such as passivation or a specific coating? Note it in your RFQ — we confirm feasibility with the quote.
Can’t find your answer? Send us your drawing and questions — an engineer replies within 24 hours.
Most often 303, 304, 316, 316L and 17-4PH. Other grades can be sourced to your drawing — tell us the specification when you ask for a quote.
304 suits most indoor and fresh-water parts. Choose 316 or 316L for chlorides, coolants, cleaning chemicals or marine exposure, and 316L when the part will be welded. If you are unsure, describe the environment and we recommend a grade with the quote.
Up to ±0.01 mm on critical features, checked on our vision measuring system. Mark the critical dimensions on your drawing and we hold those tightest; inspection reports are available on request.
Yes. We mill and turn stainless fittings, blocks and connectors for data-center liquid-cooling loops, with threads, sealing faces and O-ring grooves machined clean and burr-free, ready to assemble.
As machined, brushing, polishing up to a mirror finish of Ra 0.4, and heat treatment for hardenable grades such as 17-4PH. Specify the finish on your drawing or in your RFQ.
Yes — prototype batches of 1–100 pcs and production runs of 10,000+ pcs, quoted within 24 hours from your SolidWorks, AutoCAD, STEP, IGES or PDF drawing. We sign an NDA before you share files if you ask.
Upload 2D/3D files
Quote & DFM feedback in 24 h
Prototype or first article
Production, inspection, delivery
Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.
English