Precision CNC Parts,
Made to Print.
Eight families of custom machined parts — turned, milled and turn-mill — in metals and engineering plastics, from a single prototype to 10,000+ pieces.
Pick the family closest to your part — or simply send the drawing. Our engineers choose turning, milling or turn-mill for you and quote within 24 hours.
01These products deliver high-performance,very strong but light. It can be specifically engineered to high-demand precision aerospace machining parts for use in the aerospace industry.
02This product is designed with high conductivity,high strength, and stable performance. It is wear-resistant with high-temperature resistance. It is available in 1.lmm 1.3mm 1.6mm 1.8mm, or custom sizes.
03All CNC electronic parts produced delivered advantages such as a high level of precision,high readability, high accuracy, and reduced turnaround time. All machined parts have smooth edges that can be used to their full potential
04These parts are durable and have corrosive-resistant coatings. custom a wide range of aluminum medical parts for research equipment, hospital room equipment,aluminum tubes for disposable surgical devices, diagnostic tools, etc.
05These products are designed with an ultra-high level of cleanliness, high precision, and high strength. you can get high-grade, productive, and efficient medical parts at very cost-effective rates.
06These custom CNC milling medical parts are built of sturdy metals, thus offering long-span durability and can handle all types of interferences or wear without compromising on performance and aesthetics.
07HM is an expert in producing customized medical prototyping processes and various performance-critical precision steel plastic medical parts. We custom your products according to your requirements.
08High-accuracy metal machining even in small quantity medical parts is made from eco- friendly and durable materials that meet the special needs of medical devices. These are offered in a cost-effective personalized production solution.
Every category on this page is made in-house on 104 CNC machines in Dongguan and Zhaoqing — 3-, 4- and 5-axis machining centers, CNC lathes and turn-mill centers.
Held on critical features and verified on the vision measuring system before parts ship. Other dimensions are machined to your drawing.
CNC lathes for round parts with tight concentricity and fine finishes.
Shafts · bushings · sleeves · pins · fittingsMachining centers for prismatic and multi-surface parts, fewer setups on 5-axis.
Housings · brackets · plates · framesComplete machining in one setup for complex, non-standard parts.
Connectors · valve · hydraulic partsCustom gears and gear shafts machined to your drawing.
Spur · helical · bevel · worm · planetaryAluminum, steel, stainless steel, brass, copper, titanium, PEEK, POM, PA, ABS, PTFE, PC
As machined, anodizing, polishing, plating, brushing, heat treatment
Prototypes 1–100 pcs, production runs 10,000+ pcs
SolidWorks, AutoCAD, STEP, IGES and 2D PDF drawings
Quote in 24 h with DFM feedback, ISO quality standards, NDA on request
The same drawing review, first-article inspection and final check on the vision measuring system — whichever industry your parts go into.

Stainless fittings, manifolds and quick-connect parts for data-center cooling loops — leak-tight, clean and ready to assemble.

Gears, gear shafts, housings and brackets for reducers, grippers and motion systems.

Lightweight multi-face aluminum and titanium parts machined on 5-axis centers.

Brackets, housings and anodized performance parts, from prototype to 10,000+ pcs.

Small, complex stainless steel and titanium parts with clean, burr-free finishes.

Housings, flanges, fittings and shafts for pumps, valves, hydraulics and machinery, in steel, stainless and brass.
Not sure where your part belongs? Send the drawing — an engineer replies within 24 hours with the process and a price.
The categories are only a guide. Round parts usually go to turning, prismatic parts to 3-, 4- or 5-axis milling, and complex parts with both round and milled features to turn-mill. If you are unsure, send the drawing and our engineers choose the process for you.
Up to ±0.01 mm on critical features, whatever the category. Every order is checked against your drawing, and inspection reports are available on request.
Yes. Turn-mill centers machine round and milled features complete in one setup, and finishes such as anodizing, polishing, plating, brushing or heat treatment are specified with the same quote.
Yes. Besides aluminum, steel, stainless steel, brass, copper and titanium, we machine engineering plastics such as PEEK, POM/Delrin, Nylon/PA, ABS, PTFE and PC.
From prototype batches of 1–100 pcs to production runs of 10,000+ pcs. There is no minimum order quantity, and prototypes run with the same process and inspection as production.
A 2D or 3D drawing — SolidWorks, AutoCAD, STEP, IGES or PDF — with material, quantity and finish. We reply within 24 hours with a price and DFM feedback, and sign an NDA first if you ask.
Upload 2D/3D files
Quote & DFM feedback in 24 h
Prototype or first article
Production, inspection, delivery
Your request has been received. Our engineers will reply with a price and DFM feedback within 24 hours.
English